SETU VGFX
Fixed VoIP to GSM/3G-FXO-FXS Voice Gateways
Overview
SETU VGFX is a single-box gateway solution for any legacy system or an IP-PBX. It offers seamless connectivity between IP, GSM/3G and POTS (FXO and FXS) networks. Organizations can place calls using preferred networks to lower communication cost and avoid higher interconnection charges.
GSM/3G trunking not only saves on mobile call charges but also allows unique applications to be created. Organizations can have virtually free calling between office and field employees using the corporate CUG plans.
SETU VGFX easily fits in to any existing data infrastructure and allows low-cost long distance calling through SIP truking. Organization can connect multiple branch offices over the WAN internet for cost-effective internal calling.
Applications
GSM/3G – VoIP Gateway for Traditional PBX
- Multiple network connectivity on a single platform
- VoIP access to traditional analog systems
- Save on recurring fixed-to-mobile call costs
- Retain dialing habits and patterns
- Compatible with all TDM PBX
GSM/3G –POTS Access for IP-PBX
- Place calls over GSM/3G or POTS from existing IP terminals
- Seamless integration with existing LAN/WAN infrastructure
- Deployable in all SIP based VoIP networks
- Cost-effective calling with advanced routing logics
- Lower CAPEX and early ROI
Peer-to-Peer Calling
- Communicate with dispersed offices at minimum
- call costs
- Replace expensive Tie lines with cost-effective IP network for inter-office communication
- Make direct IP calls without involving SIP Server
- Eliminate carrier charges associated with proxy calling
- Dial by extension numbers between distant locations
Key Features
- Multiple GSM/3G SIM support
- Make and receive calls from/to analog terminals over the cellular and IP networks
- Quad-Band GSM and Tri-Band 3G network operation
- Open-standard SIP support
- Multiple SIP proxy registrations
- Restrict unwanted calls with list of denied numbers
- Direct number dialing on the cellular networks with automatic number translation
- Caller ID presentation/restriction
- Fax over IP (T.38 and PSTN Pass-Through)
- Emergency number dialing
- Hotline extension setting
- SIM balance inquiry and recharge from web-based GUI
- SNMP Monitoring
- Message Wait Indication
- Port Forwarding and DMZ
- VoIP Security over SRTP/TLS Encryption
- Web based configuration and management
Specifications
Models:
SETU VGFX8422 | Gateway with 8 VoIP Channels, 4 GSM SIMs, 2 FXO and 2 FXS Ports |
SETU VGFX8422 3G | Gateway with 8 VoIP Channels, 4 3G SIMs, 2 FXO and 2 FXS Ports |
SETU VGFX8404 | Gateway with 8 VoIP Channels, 4 GSM SIMs and 4 FXS Ports |
SETU VGFX8404 3G | Gateway with 8 VoIP Channels, 4 3G SIMs and 4 FXS Ports |
SETU VGFX8440 | Gateway with 8 VoIP Channels, 4 GSM SIMs and 4 FXO Ports |
SETU VGFX8440 3G | Gateway with 8 VoIP Channels, 4 3G SIMs and 4 FXO Ports |
VoIP Port:
Protocol | SIPv2, SDP, RTP (RFC 2833) |
Connector | RJ45 |
SIP Accounts | Up to 9 |
Echo Cancellation | G.168 with up to 128ms Tail length |
Voice Codecs | G.711 (A/µ Law), G.723.1, G.729AB, GSM-FR and iLBC |
Mobile Port:
GSM/3G SIM Cards | Up to 4 |
Frequency Bands | Quad-Band GSM850, EGSM900, DCS1800, PCS1900 Tri-Band WCDMA 850/1900/2100 MHz or Tri-Band WCDMA 900/1900/2100 MHz |
SIM Interface | 1.8, 3V SIM Interface |
Compliance | ETSI GSM Phase2/2+ |
FXO Port:
Connector | RJ11 |
Dialing and Reception | DTMF and Pulse Dialing |
CLIP | DTMF, FSK ITU-T V.23 and FSK Bellcore 202A CLI |
FXS Port:
Connector | RJ11 |
Dialing and Reception | Pulse and DTMF Dialing |
CLIP | DTMF and FSK CLI Presentation |
Answering and Disconnect Signaling | Polarity Reversal for call connect/disconnect signaling |
Power Supply:
Input | External Power Adaptor Input: 90-265VAC, 47-63Hz Output: 12VDC@2A |
Power Consumption | 12W (Typical) |
Other:
Dimensions | 23.0 x5.5 x 16.3 cm (9.1”x 2.2”x 6.4”) |
Mounting Options | Wall Mount and Table Top |
Operating Temperature | 0°C to +55°C (34°F to +131°F) |